Toshiba PSLD1X 19 Applying silicon grease, Installing the CPU Cooling Module and FanFor Intel CPU

4 Replacement Procedures 4.10 CPU Cooling Module and Fan

Figure 4-19 Applying silicon grease

Installing the CPU Cooling Module and Fan(For Intel CPU)

Install the cooling Module according to the following procedures and Figures 4-17, 4-18 and 4-19.

CAUTION: When installing the cooling module, keep the following in mind:

1.Be sure to confirm the correct position for the module.

2.Secures the relevant screws on the main board according to the number sequence sealed on heat sink module.

NOTE: Apply silicon grease with a special syringe to cover the surface of the CPU chip completely.

1.If silicon grease is already applied to the CPU and fan module, wipe them off with a cloth.

By using a special syringe, apply silicon grease G7762 to the CPU chip center so that the entire CPU chip is covered with the grease G7762.

2.Install the CPU cooling module into the correct position on the system board.

3.Place the CPU cooling module and bracket in the correct position and secure it with two M2x3 white flat-head screws.

4.Place the fan in the correct position and secure it with two M2.5x5 black flat head screws.

5.Connect the fan cable to CN501 on the system board.

4-36 Satellite L350/ Satellite Pro L350/ EQUIUM L350/ SATEGO L350 Maintenance Manual