Toshiba PSLD2X, PSLD1X, PSLD3X manual LCD Modules, Removing the LCD module

4.15 LCD Module 4 Replacement Procedures

4.15 LCD Modules

NOTE: ICs are fragile. Use extreme care not to apply pressure to the ICs along the edges of the LCD module.

NOTE: Dispose of used LCD panels (fluorescent (FL) tubes) as required by local ordinances or regulations.

NOTE: The LCD/FL cable must be carefully peeled away before disconnecting it from the module.

Removing the LCD module

Remove the LCD module according to the following procedures and Figures 4-29, 4-30.

1.Remove two M2.5x5 black flat head screws on each side securing the LCD bracket.

2.Carefully tilt the LCD module toward you.

3.Remove two M2x3 white flat head screws on each securing the LCD bracket.

4.Remove the LCD brackets.

5.Turn the LCD upside down. Be sure to place it on a cushioned surface such as a foam pad.

Satellite L350/ Satellite Pro L350/ EQUIUM L350/ SATEGO L350 Maintenance Manual 4-49