User’s Manual
4-16
O
PERATING
B
ASICS
To verify that data is written or rewritten correctly, follow the steps below before
you write or rewrite a Data CD/DVD.
1. Click the Options button ( ) on the RecordNow! Assist to open the
Options panels.
2. Select the Data in the left-side menu.
3. Mark the Verify data written to the disc after burning check box in the Data
Options.
4. Click the OK button.
DLA for TOSHIBA
Note the following limitations when you use DLA:
◆This software supports only rewritable discs (DVD+RW/+R DL, DVD-RW/
-R DL, and CD-RW). It does not support DVD+R, DVD-R, and CD-R discs
that are not rewritable.
◆DLA does not support formatting a DVD-RAM disc and writing to it. They
are performed by DVD-RAM Driver Software. If DLA Format menu may
appear when inserting a DVD-RAM disc into the drive and right-clicking
the drive icon in Windows Explorer, please use “DVDForm” to format this
disc. You can run “DVDForm” by clicking the Start button on the taskbar to
display the Start menu and then selecting “All Programs”, “DVD-RAM”,
“DVD-RAM Driver” and “DVDForm” sequentially.
◆Do not use any discs that have been formatted with packet writing software
other than DLA. Similarly, do not use any discs that have been formatted
with DLA with any packet writing software other than DLA. When using a
disc you are not familiar with, format it by selecting “Full Format” before
using it.
◆Do not use the Cut & Paste function for files and folders. A file or folder that
has been cut may be lost if writing fails due to an error on the disc.
◆When writing the Setup files for the program into a disc formatted by DLA
and starting Setup from this disc, an error may occur. In this case, please
copy them to your hard disk and then run Setup.
Video
You can record video using WinDVD Creator 2 Platinum.
When using WinDVD Creator 2 Platinum: