User’s Manual
8-12
O
PTIONAL
D
EVICES
❑PS/2 mouse port
❑PS/2 keyboard port
❑DC IN socket
❑Security lock slot
❑Audio line-in, line-out jacks
❑Universal Serial Bus (four) ports
❑i.LINK (IEEE 1394) port
❑DVI port (Supported with some models)
Connecting the Advanced Port Replicator III
When connecting your TOSHIBA computer to the Advanced Port Replicator
(APR III), please note the location of the expansion port on your computer for
proper alignment. Your computer will also have a (S) symbol that indicates the
docking position (depend on model you purchased).
To properly connect the computer to the APR III, first make sure that the Slide
Adjuster on the APR III is set to the correct slot position for your computer. Then
check that the center mark arrow (located on the top-back portion of the com-
puter chasis as shown in Figure 1 below) on the computer is aligned with the cen-
ter mark (S) on the APR III.
Press down the top-back portion of the computer to ensure a proper connection
(Figure 2).
NOTE: Your system may vary from that shown in the above connection (Fig-
ure 2).