Toshiba RAV-SM1106BT-TR, RAV-SM406BT-TR Part name, Procedure, Remarks, Detachment, Attachment

No.	Part name		Procedure	Remarks
d	Suction panel	1. Detachment
		1)	Remove the fixing screws A which fix the
			suction panel. Loosen the fixing screws B.
		2)	Slide the suction panel to the arrow side
			and then remove the panel.
		2. Attachment
		1)	Hook the suction panel to the fixing screws B
			and tighten screws.
		2)	Attach the removed screws A to the original
			positions.

Under air intake
40 Type	Fixing screws A		80 Type	Fixing screws A	140 Type	Fixing screws A
Suction panel			Suction panel		Suction panel
Fixing screws B				Fixing screws B		Fixing screws B
Back air inatke
Fixing screws B				Fixing screws B	Suction panel	Fixing screws B
	Suction panel			Suction panel
Fixing screws A		Fixing screws A			Fixing screws A

e	Electric parts	1. Detachment
	box cover	1)	Remove the screw A of the electric parts
			box cover to loosen screw B.		Projection on the side plate
		2)	As shown in the right figure, when sliding it
			toward arrow direction and pulling to this		Slit
			side, the electric parts cover opens using
			the hinge part as a shaft.
		3)	Take off the slit of the electric parts box	Side plate		Screw B
			cover from the projection of the side plate
			and then remove the cover.
		2. Attachment
		1)	Hook the slit of the electric parts box cover
			to the projection of the side plate, close the		Key hole
			cover, enter screw B in the Key hole and
			then slide it.			Screw-A
		2)	Fix the electric parts box cover by
			tightening with screws A and B.		Electric parts box cover
				Hinge part

– 84 –