Operating Basics
4-52 User’s Manual
O
PERATING
B
ASICS
Dialing Properties
Select this item to display the dialing properties.
Connecting
To connect the internal modem cable, follow the steps below.
1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack.
Figure 4-20 Connecting the internal modem
Disconnecting
To disconnect the internal modem cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the con-
nector.
2. Disconnect the cable from the computer in the same manner.
If you are using the computer in Japan, the Telecommunications
Business Law requires that you select Japan region mode. It is
illegal to use the modem in Japan with any other selection.
Do not pull on the cable or move the computer while the cable is
connected.
TELEPHONE
JACK
MODEM JACK