User’s Manual 7-5
HW Setup and Passwords
HW S
ETUP
AND
P
ASSWORDS
If there are only 2 HDDs, the Boot Priority Options setting will be like the fol-
lowing.
You can override the settings and manually select a boot device by pressing one
of the following keys while the computer is booting:
This procedure does not affect the settings.
* In this computer, CD-ROM refers to the DVD-ROM, CD-R/RW or CD-RW/
DVD-ROM drives.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
2. Use the up/down cursor keys to select boot device you want and press
Enter.
USelects the USB diskette drive.
NSelects the Network.
1Selects the primary HDD.
2Selects the secondary HDD.
CSelects the CD-ROM*.
❑If a supervisor password is set, the menu above does not
appear when you use the user password to start the computer.
❑The selection method above does not change the boot priority
settings in HW Setup.
❑If you press a key other than one of those above or if the
selected device is not installed, the system will boot accord-
ing to the current setting in HW Setup.