
4.4 Display Assembly | 4 Replacement Procedures |
Installing the Display Assembly
Install the display assembly according to the following procedures and Figures
1.Place the display panel in the correct position and push the wireless antenna cable, Speakers cable and LCD/FL cable into the bottom cover.
2.Connect the LCD/FL cable to CN3 on the system board.
3.Connect the Speakers cable to CN7 on the system board.
4.Secure the display assembly with two M2.5x 10 black
Close the display panel and turn the computer so that the back is facing you and secure two M2.5x 10 black
TOSHIBA NB100 Maintenance Manual |