3.3 Option | 3 Diagnostic Programs |
•Test Order
Specify the order of the test items. Choose 'Sequence' to adopt the sequential mode; choose 'Random' to run the test items in random sequence.
•Test Options
Choose one of the following options:
9Wait On Error
Wait for further confirmation while an error occurs.
9Break On Error
Stop the test when a test item fails.
9Pause Enable
Pause at the end of each test items and wait for the user to response with the test items that requires the user to assist the test processes, such as the keystroke test.
9Interactive
If the item is enabled during the test, the test items that need user to response can run normally, such as Mouse test; If it is disabled, those test items will report FAIL.
When the option here is enabled, it would affect all the test items while the same option in “Item Parameters Configuration” only affect that test item.
