Toshiba TOSHIBA NB100 manual CCD Board and Speakers Replacement Procedures

4.10 CCD Board and Speakers 4 Replacement Procedures

Installing the CCD Board and Speakers

Install the CCD board and Speakers according to the following procedures and Figure 4-21.

1.Seat the CCD module in the correct position

2.Secure Two M2 x 2 black flat-head screws on the CCD board.

3.Seat the right and left side Speakers on the correct position.

4.Route the speaker cable in the wire guide.

TOSHIBA NB100 Maintenance Manual 4-37