RJ45 cable

4.7 System Board, DC-IN, RJ-45 Cable and Blue-Tooth Card 4 Replacement Procedures

4.7 System Board, DC-IN, RJ-45 Cable and Blue-Tooth Card

Removing the System Board, DC-IN, RJ-45 Cable and Blue-Tooth Card

NOTE: Be careful of the eject button for the PC card. It can be damaged when removing the board. Make sure it is securely installed.

Remove the DC-IN, RJ-45 Cable and Blue-Tooth Card according to the following procedures and Figure 4-15, 4-16.

1.Remove the DC-IN cable from CN5 on the system board.

2.Remove the RJ-45 cable from CN511.

3.Remove one M 1.6 x 4 black flat-head screw on Blue-Tooth card.

4.Remove the Blue-Tooth cable from CN10 on the system board.

5.Remove the Blue-Tooth Card on system board.

6.Remove the MIC rubber on the system board.

DC-IN cable

CN511

M1.6 x 4 black flat-head screw

Blue tooth card

Blue tooth rubber

CN5

CN10

MIC rubber

Figure 4-15 Removing the system board

TOSHIBA NB100 Maintenance Manual

4-27

Page 155
Image 155
Toshiba TOSHIBA NB100 manual System Board, DC-IN, RJ-45 Cable and Blue-Tooth Card, Removing the system board