Toshiba TOSHIBA NB100 manual Installing the Keyboard Cover and Keyboard

4 Replacement Procedures 4.2 Keyboard cover and keyboard

Installing the Keyboard Cover and Keyboard

Install the keyboard according to the following procedures and Figure 4-4, 4-5, 4-6.

1.Connect the keyboard cable to CN6 on the system board.

2.Secure the keyboard with two M2 x 4 black flat-head screws.

3.Place the keyboard cover in the correct position and secure the following 6 latches, in that order:

-One latch on each of the left and right sides

-Four bottom latches.

4.Secure the keyboard cover with two M2.5 x 10 flat-head screws and one M2.5 x 5 black flat-head screw.

4-16 TOSHIBA NB100 Maintenance Manual