Toshiba TOSHIBA NB100 Display Assembly Replacement Procedures, Removing the Display Assembly

4.4 Display Assembly 4 Replacement Procedures

4.4 Display Assembly

Removing the Display Assembly

CAUTION: Use care to avoid that the antenna cable is not caught between the display assembly and computer.

Remove the display assembly according to the following procedures and Figures 4-8, 4-9.

1.Turn the computer upside down and remove two M2.5x10 black flat head screws.

2.Restore the normal computer placement and open the display panel.

M2.5 X 10 black flat-head screw

Figure 4-8 Removing the screws from the back of the computer

3.Disconnect the LCD/FL cable from CN3 on the system board.

4.Disconnect the Speakers cable from CN7 on the system board.

5.Remove two M2.5x 10 black flat-head screws securing the LCD module to the bottom cover.

6.Remove the wireless antenna cables, Speakers cable and LCD/FL cable from the bottom cover.

TOSHIBA NB100 Maintenance Manual 4-19