3.11Error Codes and Description 3 Diagnostic Programs
TOSHIBA NB100 Maintenance Manual
61
01
Keyboard Map & Stroke
Test Fail Keyboard Map & Stroke Test
fails. Check the KBD connection and
repeat the test.
03 Clock Line Test Fail Clock Line Test fails. As above.
04 Data Line Test Fail Data Line Test fails. As above.
05xx Mouse
01 Touch Pad Test Fail Touch Pad Test Fail Check the mouse connection and
repeat the test.
20xx IDE-HDD
01 Get Parameter Fail ! Wrong test parameters are input
by user. Reinput the correct parameters.
02 Write Pattern Error HD is damaged. Send the HD for repair.
03 Data Compare Error HD is damaged. As above.
04 Read Verify Error HD is damaged. As above.
05 Seek Error HD is damaged. As above.
06
Disk Controller Self Test
Failed The HD controller is damaged. As above.
07
Disk Controller Test
unexpected interrupt
Failed The HD controller is damaged. As above.
09
Disk Controller action
Test Failed The HD controller is damaged. As above.
10
Disk dos not support
SMART Disk dos not support SMART Change HD which supported
SMART and test again
11
Disk read attribute
threshold error Disk read attribute threshold
error Send the HD for repair.
12
Disk read attribute value
error Disk read attribute value error As above.
13
Disk SMART attribute
value error Disk SMART attribute value
error As above.