Toshiba TOSHIBA NB100 Replacement Procedures SSD/HDD and Fan, Removing the SSD/HDD and Fan

4 Replacement Procedures 4.6 SSD/HDD and Fan

4.6 SSD/HDD and Fan

Removing the SSD/HDD and Fan

CAUTION: Do not press on the top or bottom of the drive. Applying such pressure can either corrupt the data in the drive or damage the drive.

Remove the SSD/HDD (hard disk drive) and Fan according to the following procedures and Figures 4-12, 4-13 , 4-14.

1.Remove the two M2.5 x 4 flat-head screws on the SSD/HDD pack.

2.Remove the SSD/HDD pack by pulling on the tab attached to the pack.

3.Remove one M2.5 x 7 black flat-head screw on the Fan.

4.Disconnect the Fan cable form CN9.

5.Remove Fan.

M2.5 x 4 black flat-head screw

M2.5 X 7 black flat-head screw

CN9

Figure 4-12 Removing the HDD pack

NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or replace the HDD pack only if it fails.

4-24 TOSHIBA NB100 Maintenance Manual