Turbo Chef Technologies 30 manual Controls Speedcook Oven

2 The Speedcook Oven

Controls – Speedcook Oven

Single Wall Oven & Top Oven in the Double Wall Model

The TurboChef Speedcook Oven includes a state-of-the-art interface that provides built-in, on-demand information, and over 600 preprogrammed cook time and temperature settings. For an overview of the seven Speedcook modes, see pages 3-4. For a list of all preprogrammed cook settings, see the “Preprogrammed Cook Settings” document, included with this packet.

Classic Style Analog Clock and Timer

The clock and timer run with advanced electronic control knobs.

Set Clock Knob

Use to set the time.

1.Press knob to extend.

2.Turn knob to set time.

3.Press knob back in to original position.

Cook NavigatorTM

Consists of the Cook Navigator Display and the Info, Back, Cancel, and Start keys.

CookWheelTM (outer knob)

Turn to select a Speedcook mode, Self-Clean, or to turn the oven off.

CookWheelTM (inner knob)

Turn to navigate through the options on the Cook Navigator Screen. Press knob to select an option, begin a preheat cycle, or initiate a cook cycle.

Set Timer Knob

Use to set the timer.

1.Press knob to extend.

2.Turn knob to set timer

–up to 60 minutes.

3.Press knob back into original position.

Timer does not begin counting down until knob is pressed back in to position.

Info Key

Press to display information on the Oven Setup (sound, units & measurements, display, and software updates), Help Topics, and Oven Tips.

NOTE: When the oven is in the middle of a cook cycle, you will not be able to access the Info screen.

Back Key

Press to return to the previous screen.

Cancel Key

Press to terminate

a cook cycle or to return to the main screen.

Oven Light Switch

Press to illuminate the top cook cavity.

Start Key

Press to select an option, begin a preheat cycle, or initiate a cook cycle.

NOTE: To turn the oven on, you must select a Speedcook mode. See CookWheel (outer knob).