![](/images/new-backgrounds/1093052/9305285x1.webp)
D IAGNOSING AN ISSUE | 27 |
LEFT
RIGHT
Step: 2/3 | In this example, the oven has completed 10 Cook | Step: 1 Simultaneously press and hold for 1 | Step: 4 |
| Cycles. Press the “COOKS” Soft Key again to | second to get to the Test Mode Menu |
|
| view the cumulative cook time. | (Screen 1). NOTE: Oven must be in |
|
|
| the Off or |
|
|
|
| |
: Viewing the Cook Counter/Cumulative Cook Time |
|
|
Testing the Rack Oscillator (Figure 32)
NOTE: The Oven Rack will not oscillate if it is not properly set on the support pins.
To test the Rack Oscillator:
1.From Screen 1 of the Test Mode Menu, press the “RACK OSC” Soft Key (bottom right).
2.When finished testing, press the “RACK OSC” Soft Key (bottom right) again to turn the rack oscillator off.
3.Press the “BACK/STOP” Key to end the test and exit the Test Mode Menu.
Enabling/Disabling the Diagnostic Mode (Figure 33)
Enable Diagnostic Mode to
οView Cook Cycle parameters when cooking.
οView Status Indicators (page 23) during a Cook Cycle.
To enable/disable the Diagnostic Mode:
1.From Screen 1 of the Test Mode Menu, press the “DOWN” Key to toggle to Screen 2 of the Test Mode Menu.
2.Press “DIAG” Soft Key (top left) to turn the Diagnostic Mode on or off.
3.When finished, press the “BACK/STOP” Key to exit the Test Mode Menu.
Viewing Cook Counter/Time (Figure 34)
The High h Batch oven logs how many Cook Cycles have completed, as well as the cumulative cook time.
To view how many Cook Cycles have completed and the cumulative cook time:
1.From Screen 1 of the Test Mode Menu, press the “DOWN” Key to toggle to Screen 2 of the Test Mode Menu.
2.Press the “COOKS” Soft Key (middle left) to view total number of Cook Cycles completed.
3.To view the cumulative cook time, press the “COOKS” Soft Key (middle left) again.
4.When finished, press the “BACK/STOP” Key to exit the Test Mode Menu.
NOTE: To permanently erase the Cook Cycle totals, press the “ENTER” Key when viewing the total number of completed Cook Cycles.