Ultimate Technology 600 POS manual Local Mode Programming Instructions = Default Settings

Table 2. Local Mode Programming Instructions

* = Default Settings

Function Code(s)	Operation		Normal Indication		Remarks
08	1.	Swipe	Program Card. While in programming mode, at the Series 600 Keyboard
Enable/Disable		numeric keypad, enter Function Code 08.
Magnetic Stripe		LED (2) turns on.
Reader (MSR)	2. At the Series 600 Keyboard numeric keypad, enter the applicable number (1 through
Tracks
		7) to select the MSR track configuration per list below.
			1	= Track 1 enabled only
			2	= Track 2 enabled only
			3	= Track 3 enabled only
			4	= Tracks 1 and 2 enabled *
			5	= Tracks 2 and 3 enabled
			6	= All tracks disabled
			7	= OPOS mode tracks 1 and 2
		LED (2) turns off.
	3. Program the next function code or exit the local programming mode by entering 99 on
		Series 600 Keyboard numeric keypad or by swiping the Program Card.
	Note: Disabling all format tracks will not disable the SECURE or PROGRM cards.
09	1.	Swipe	Program Card. While in programming mode, at the Series 600 Keyboard
Magnetic Stripe		numeric keypad, enter Function Code 09.
Reader (MSR)		LED (2) turns on.
Beeper	2. At the Series 600 Keyboard numeric keypad, enter the applicable number (1 through
		4) to select the magnetic stripe reader beeper operation per list below.
			1	= beep on good read for all enabled tracks
			2	= beep on bad read for all enabled tracks
			3	= beep on good or bad read of enabled tracks*
			4	= no beep on good or bad reads
		LED (2) turns off.
	3.	Program the next function code or exit the local programming mode by entering 99 on
		Series 600 Keyboard numeric keypad followed by ENTER or by swiping the Program
		Card.

Series 600 POS Keyboard 16