Table 2. Local Mode Programming Instructions
* = Default Settings
Function Code(s) | Operation | Normal Indication | Remarks |
451. Swipe Program Card. While in programming mode, at the Series 600 Keyboard
46 | numeric keypad, enter applicable Function Code 45, 46, 47, or 48. | |
47 | LED (2) flashes. | |
48 | ||
| ||
Drawer 1 | 2. At the auxiliary keyboard, type the desired key or type the desired key sequence. | |
Open (45) | ||
Note that the maximum number of key codes is limited to 24 – this is equivalent to | ||
Closed (46) | ||
approximately 12 keystrokes. | ||
| ||
Drawer (2) | If the Series 600 Keyboard beeps and | |
LED (2) turns off while entering key | ||
Open (47) | ||
codes at the auxiliary keyboard, you | ||
Closed (48) | ||
have exceeded 24 key codes. Repeat | ||
| ||
| steps 1 and 2. | |
| 3. At the Series 600 Keyboard, press ENTER. | |
| LED (2) turns off. | |
| 4. Program the next function code or exit programming mode by entering 99 on Series | |
| 600 Keyboard numeric keypad or by swiping the Program Card. |
491. Swipe Program Card. While in programming mode, at the Series 600 Keyboard
Poll | numeric keypad, enter Function Code 49. | |
Unsolicited | LED (2) turns on. | |
Cash Drawer Status | ||
|
2.At Series 600 Keyboard numeric keypad, enter the applicable number (0 or 1) to select status method per list below.
0 = Send on change or transition
1 = Send only with poll command CDSTATUS
LED (2) turns off.
3.Program the next function code or exit programming mode by entering 99 on Series 600 keyboard numeric keypad or by swiping the Program Card.
Series 600 POS Keyboard | 25 |
