LOCAL MODE PROGRAMMING

KEY MAKE/BREAK CODES AND EXTENDED FUNCTIONS

A summary of all keyboard parameters programmable in the local mode, assigned Function Codes and factory default settings is given in Table 3.

Table 3. Local Mode programming Function Codes and Default Settings

FUNCTION

PARAMETER

DEFAULT

REMARKS

CODE

 

SETTING (XXh

 

 

 

= Hex Code in

 

 

 

ASCII)

 

00

Program Keyboard Primary Keys

See default

Used to program primary keys on

 

 

(Appendix A)

Series 600 Keyboard. The keys can

 

 

 

be programmed to have primary and

 

 

 

secondary levels of function. The

 

 

 

primary function is activated when only

 

 

 

the designated key is pressed. The

 

 

 

secondary function is activated when

 

 

 

both the Sec Op key and designated

 

 

 

key are depressed. Use Function

 

 

 

Code 01 to program secondary key

 

 

 

functions.

01

Program Keyboard Secondary

See default

See remarks above.

 

Keys

 

 

02

Copy Primary Keys to Secondary

None

Used to copy primary key code into

 

Keys

 

key secondary position

03

Program Primary OPOS Keys

None

To be used in conjunction with UTC

 

 

 

OPOS drivers.

04

Program Secondary OPOS Keys

None

To be used in conjunction with UTC

 

 

 

OPOS drivers

08

Enable/Disable Magnetic Stripe

Channels 1,2

The magnetic card reader can read

 

Reader (MSR) Tracks

enabled

three formats of information, two at

 

 

 

any one time, on standard format

 

 

 

cards. This function is used to select

 

 

 

which tracks on the MSR are enabled

 

 

 

and/or disabled.

09

MSR Beep Configuration

Beep on good

Useful for indicating a good or bad

 

 

and bad read

reading when card swiped through

 

 

 

reader. (Uses different tones)

10

MSR Track 1,3 Prefix

% (25h) for

Used to send a prefix before the

 

 

format 1

magnetic card track data.

 

 

;(3Bh) for

 

 

 

format 3

 

11

MSR Track 1,3 Field Separator

^(5Eh) for

Used to send a field separator

 

 

format 1 =

between fields of magnetic card data.

 

 

(3Dh) for

 

 

 

format 3

 

Series 600 POS Keyboard

30

 

Page 35
Image 35
Ultimate Technology 600 POS manual Function Parameter Default Remarks Code