Ultimate Technology 600 POS manual Function Parameter Default Remarks Code Setting

FUNCTION		PARAMETER	DEFAULT	REMARKS
	CODE		SETTING
			(XXh = Hex
			Code in
			ASCII)
30		RS232 Port 1 Baud Rate	9600 Baud Rate	Used to select a baud rate for Port 1. Baud
				rates available are: 300, 600, 1200, 2400, 4800,
				9600, 19200, 38400 and 57600.
31		RS232 Port 1 Stop Bits	2 stop bits	Used to select number of stop bits, 1 or 2, used
				with Port 1.
32		RS232 Port 1 Parity	No parity	Used to select parity used with Port 1.
				Selections available are: no parity, odd parity or
				even parity.
33		RS232 Port 1 Handshaking	Both	Used to select method of handshaking used
				with Port 1. Selections available are: none,
				CTS/RTS, XON/XOFF or both.
34		RS232 Port 1 Word Length	8 bits	Used to change the word length, 7 or 8 bits, of
				the data at Port 1.
35		RS232 Port 1 Prefix	None	Used to place a prefix before a packet of data
				before it is sent out of the keyboard Main Port.
36		RS232 Port 1 Suffix	<CR> (0Dh)	Used to place a suffix after the packet of data
				before it is sent out of the keyboard Main Port.
38		Keyswitch Position 1 MAKE	k1+	Used to program the MAKE codes of the
				keyswitch. When the key is turned into position
				1, the switch can send macros and/or perform
				an internal secure (lock).
3 9		Keyswitch Position 1 BREAK	k1 -	Used to program the BREAK codes of the
				keyswitch . When the key is turned out of
				position 1, the switch can send macros
				and/or perform an internal secure (lock) .
4 0		Keyswitch Position 2 MAKE	k2+	Used to program the MAKE codes of the
				keyswitch . When the key is turned into
				position 2, the switch can send macros
				and/or perform an internal secure (lock) .
4 1		Keyswitch Position 2 BREAK	k2 -	Used to program the BREAK codes of the
				keyswitch . When the key is turned out of
				position 2, the switch can send macros
				and/or perform an internal secure (lock) .
4 2		Keyswitch Position 3 MAKE	k3+	Used to program the MAKE codes of the
				keyswitch. Wh en the key is turned into
				position 3, the switch can send macros
				and/or perform an internal secure (lock) .
4 3		Keyswitch Position 3 BREAK	k3 -	Used to program the BREAK codes of the
				keyswitch . When the key is turned out of
				position 3, the switch can send m a c r o s
				and/or perform an internal secure (lock) .
	Series 600 POS Keyboard		32