Ultimate Technology 600 POS manual Local Mode Programming Instructions = Default Settings

Table 2. Local Mode Programming Instructions

* = Default Settings

Function Code(s)	Operation		Normal Indication		Remarks
96	1.	Swipe Program	Card.	While in programming mode, at the Series 600 Keyboard
		numeric keypad, enter Function Code 96.
Set Secure Mode
		LED (2) turns on.
	2.	At Series 600 Keyboard numeric keypad, enter the applicable number (0 or 1) to
		select override secure mode of operation per list below.
		0 = not secure
		1 = secure
		LED (2) turns off.
	3.	Program the next function code or exit programming mode by entering 99 on Series
		600 Keyboard numeric keypad or by swiping the Program Card.
97	1.	Swipe Program	Card.	While in programming mode,	at the Series 600 Keyboard
		numeric keypad, enter Function Code 97.
Default Keyboard
		LED (2) turns on.
	2.	At Series 600 Keyboard numeric keypad, enter the applicable number (0 or 1) to
		select mode of default operation per list below. Note selection of 1 below resets the
		Series 600 Keyboard to all programmed default key and port settings.
		0 = Exit default mode
		1 = Default mode
	3.	Program the next function code or exit programming mode by entering 99 on Series
		600 Keyboard numeric keypad or by swiping the program Card.
99	Used to terminate the programming mode. When activated, causes all programmed
Exit Program Mode	changes to be saved into non-volatile RAM and the keyboard to do a warm boot. Exiting
	programming mode can also be accomplished b swiping the Program Card.

Series 600 POS Keyboard 29