Ultratec 200 manual During a Captioned Call Mute, During a Non-Captioned Call Hold

2.Press the button next to the up or down arrow to adjust the contrast.

3.Press the button next to Exit to leave the menu and view captions on the display again.

Using Hold/Mute

During a Captioned Call (Mute)

Press the HOLD button during a captioned call to mute your voice and background sounds. Confirm that the red light above the HOLD button is lit. As long as this light is on, you can still hear what the person on the other end of the line is saying and you will still see captions on the display. However, the other person will not be able to hear you. When you are ready to resume your conversation, press the HOLD button a second time.

During a Non-Captioned Call (Hold)

Press the HOLD button during a non-captioned call to place the other person on hold. Confirm that the red light above the HOLD button is lit. As long as this light is on, the person on the other end of the line cannot hear what you are saying and you cannot hear them. When you are ready to resume your conversation, press the HOLD button a second time.

You can also resume your conversation from another telephone on the same line. This is done by hanging up the handset while the CapTel is on hold, then picking up the handset of the second phone. The CapTel is hung up automatically.

Using Flash (Non-Captioned Calls Only)

Some telephone service features like call-waiting or 3-Way Calling require a “hook flash.” The hook flash is a very brief interruption of the connection like hanging up the phone for one second. When using hook flash during a non-captioned conversation, press the FLASH button. There is a brief click or silence on the line. If using call-waiting, the second call should now be connected.

NOTE: The Flash button should not be used in 1-Line Mode during a captioned call. This may disconnect the call.

USING CALLING FEATURES ■ 17