Activate 2-Line Menu

1.With the handset hung up, press the MENU key repeatedly until you see 2Line Mode?. Press the button next to On to turn 2-Line capabilities on. Press Exit to leave the menu.

NOTE: If 2Line Mode? does not appear in your CapTel menu, contact CapTel Customer Service.

2.Attach the desktop/wall footplate, making sure the larger side is along the top edge of the CapTel. (For wall mount installation, see page 7.)

NOTE: If you are in an office setting, and your 1st line requires a number to reach an outside line (such as “9”), you will need to manually dial a dialing prefix before placing your call. If your 2nd line also requires a dialing prefix to get an outside line, make sure you’ve entered one in the CapTel menu as well. See page 20 for details.

You are now ready to begin making and receiving calls using the 2-Line capabilities.

If you have already used your CapTel phone in 1-Line Mode, be sure to remove any Call-Waiting blocks previously set in the CapTel menu.

PLACING A CALL WITH CAPTIONS (2-LINE MODE)

1.Verify that the Caption feature is On. The red light over the CAPTION button should be lit. If the light is not on, turn on the feature by pressing the CAPTION button.

2.Pick up the handset and dial the phone number of the person you want to call.

3.You may begin speaking to the person as soon as you hear them answer, or when you see captions on the CapTel display.

SETTING UP THE CAPTEL FOR 2-LINE USE 35

Page 37
Image 37
Ultratec 200 manual Activate 2-Line Menu, Placing a Call with Captions 2-LINE Mode