Manuals / Vertex Standard / Marine Equipment / Marine Radio

Vertex Standard VX-177 manual Disabling the TX/BUSY Indicator, Automatic POWER-OFF APO Feature

Models: VX-177

1 88

Download 88 pages 8.19 Kb

Page 65

MISCELLANEOUS SETTINGS

DISABLING THE TX/BUSY INDICATOR

Further battery conservation may be accomplished by disabling the TX indicator while transmitting and disabling the BUSY indicator while receiving a signal. Use the following procedure:

1. Press the [F] key, then press the [0(SET)] key to enter the Set mode.

2. Rotate the DIAL knob to select Set Mode Item 8: BSY.LED if

you wish to disable the BUSY indicator or Set Mode Item 48: TX.LED if you wish to disable the TX indicator.

3. Press the [F] key momentarily to enable adjustment of this Set

Mode Item. 4. Rotate the DIAL knob to set this Set Mode Item to “LED.OFF”

(thus disabling the BUSY or TX lamp).

5. When you have made your selection, press the PTT switch to

save the new setting and exit to normal operation. 6. If you wish to re-enable the TX/BUSY Indicator, just repeat the

above procedure, rotating the DIAL knob to select “LED. ON” in step 4 above.

AUTOMATIC POWER-OFF (APO) FEATURE

The APO feature helps conserve battery life by automatically turning the radio off after a user-defined period of time within which there has been no dial or key activity. The avail- able selections for the time before power-off are 0.5 to 12.0 hours in 0.5 hour multiple, as well as APO Off. The default condition for the APO is OFF, and here is the procedure for activating it:

1. Press the [F] key, then press the [0(SET)] key to enter the Set mode.

2. Rotate the DIAL knob to select Set Mode Item 1: APO. 3. Press the [F] key momentarily to enable adjustment of this Set

Mode Item. 4. Rotate the DIAL knob to select the desired time period after

which the radio will automatically shut down. 5. When you have made your selection, press the PTT switch to

save the new setting and exit to normal operation.

When the APO is activated, the “” icon will appear on the LCD. If there is no action by you within the time interval programmed, the microprocessor will shut down the radio automatically.

Rotate the VOL/PWR knob counter-clockwise to the “off” position, then clockwise out of the click-stop, to turn the radio on after an APO shutdown.

VX-177 OPERATING MANUAL

63

Image 65

Vertex Standard VX-177 manual Disabling the TX/BUSY Indicator, Automatic POWER-OFF APO Feature

Contents

Yaesu Europe B.V Vertex Standard Contents General Description Available Options Accessories & OptionsSupplied Accessories Controls & Connectors TOP & Front Panels Controls & Connectors LCD Moni Switch Controls & Connectors Side PanelPTT Push To Talk Switch Press F + KEY Controls & Connectors Keypad Functions One step or moves the memory Installation of FNB-83 Battery Pack Installation of AccessoriesAntenna Installation LOW Battery Indication Battery Charging Installation of FBA-25A Alkaline Battery Case Option Belt Clip Installation Interface of Packet Tncs Operation Switching Power on and OFFAdjusting the Audio Volume Level Frequency Navigation Tuning DialSquelch Adjustment Scanning Direct Keypad Frequency Entry Transmission Changing the Transmitter Power Level Keyboard Locking Advanced Operation Disabling the Keypad Beeper KEYPAD/LCD Illumination RF Squelch Checking the Battery Voltage Automatic Repeater Shift ARS Repeater OperationRepeater Shifts Manual Repeater Shift Activation Changing the Default Repeater Shifts Checking the Repeater Uplink Input Frequency VFO Split Mode Repeater Operation Ctcss Operation CTCSS/DCS/EPCS Operation DCS Operation Tone Search Scanning Epcs Enhanced Paging & Code Squelch Storing the Ctcss Tone Pairs for Epcs Operation Activating the Enhanced Paging & Code Squelch System CTCSS/DCS/EPCS Bell Operation Tone Calling 1750 HZ Split Tone Operation Memory Storage Memory ModeStoring Independent Transmit Frequencies Odd Splits Home Channel Memory Memory Recall Labeling Memories Deleting Memories Memory Offset Tuning Memory Bank Recall Assigning Memories to a Memory BankRemoving Memories from a Memory Bank Memory Bank Operation Moving Memory Data to the VFO Memory only Mode VX-177 Operating Manual Scanning Setting the Scan-Resume Technique VFO Scanning Manual VFO ScanProgrammed VFO Scan Memory Scanning How to Skip Omit a Channel during Memory Scan Operation Preferential Memory Scan Memory Bank Scan Programmable Band Limit Memory Scan PMS Memory Channel Priority VFO PriorityHome Channel Priority Priority Channel Scanning Dual Watch VFO-VFO Dual Watch Priority Revert Mode Band Edge Beeper Automatic Lamp Illumination on Scan Stop VX-177 Operating Manual Emergency Channel Operation Emergency Feature Emergency Automatic ID EAI Feature Emergency Feature Storing Smart Search Memories Setting the Smart Search ModeSmart Search Operation Internet Connection Feature Internet Connection Feature Basic Arts Setup and Operation Arts Alert Beep Options Arts Polling Time Options CW Identifier Setup Dtmf Autodialer Dtmf OperationManual Dtmf Tone Generation To send the telephone number Storing the 3-digit code for the Dtmf Pager Operation Dtmf Pager Operation Requires Optional FTD-7 Activating the Dtmf Pager Storing the ANI code Activating the ANI feature Password Miscellaneous Settings Changing the Channel Steps Programming the KEY Assignments TX Battery Saver Receive Battery Saver Setup Automatic POWER-OFF APO Feature Disabling the TX/BUSY Indicator Busy Channel LOCK-OUT Bclo Transmitter TIME-OUT Timer TOT DCS Code Inversion Changing the TX Deviation Level Reset Procedures Try again Cloning VX-177 Operating Manual ARS SET Menu Mode NET CTCSS/DSC/DTMF/EPCS Setting ANI Set Mode Item 2 AR BEP Set Mode Item 1 APOSet Mode Item 3 AR INT Set Mode Item 4 ARS Set Mode Item 9 CLK.SFT Set Mode Item 8 BSY.LEDSet Mode Item 10 Cwid Set Mode Item 11 CW WRT Set Mode Item 18 ECS.CDR Set Mode Item 17 DT WRTSet Mode Item 19 ECS.CDT Set Mode Item 20 EDG.BEP Set Mode Item 23 INT CD Set Mode Item 22 I NETSet Mode Item 24 INT MR Set Mode Item 25 Lamp Set Mode Item 28 Name Set Mode Item 27 M/T-CLSet Mode Item 29 NM WRT Set Mode Item 30 Pswd Set Mode Item 34 RF SQL Set Mode Item 33 REV/HMSet Mode Item 35 RPT.MOD Set Mode Item 36 PRI.RVT Set Mode Item 40 SCN.LMP Set Mode Item 39 SCN MDSet Mode Item 41 Shift Set Mode Item 42 Skip Set Mode Item 45 Step Set Mode Item 44 SQL.TYPSet Mode Item 46 TN FRQ Set Mode Item 47 TOT Set Mode Item 52 EAI Set Mode Item 51 WID.NARSet Mode Item 53 ANI Set Mode Item 54 ANI.WRT General Specifications Installation of the FTD-7 Dtmf Paging Unit Option Declaration by Manufacturer 0511X-0K