Set Mode Item 1 APO, Set Mode Item 4 ARS | Vertex Standard VX-177

SET (MENU) MODE

Set Mode Item 1 [APO]

Function: Setting of the Automatic Power-Off feature.

Available Values: OFF/0.5H - 12.0 H in 0.5 hour multiples

Default: OFF

Set Mode Item 2 [AR BEP]

Function: Selects the Beep option during ARTS operation.

Available Values: INRANG/ALWAYS/OFF

Default: INRANG

INRANG: Beeps sound only when the radio first detects that you are within range.

ALWAYS: Beeps sound every time a polling transmission is received from the other sta- tion (every 15 or 25 seconds when in range).

OFF: No alert beeps sound.

Set Mode Item 3 [AR INT]

Function: Selects the Polling Interval during ARTS operation.

Available Values: 25 SEC/15 SEC

Default: 25SEC

Set Mode Item 4 [ARS]

Function: Enables/Disables the Automatic Repeater Shift function.

Available Values: ARS. ON/ARS.OFF

Default: ARS. ON

Set Mode Item 5 [BCLO]

Function: Enables/Disables the Busy Channel Lock-Out feature.

Available Values: BCL. ON/BCL.OFF

Default: BCL.OFF

Set Mode Item 6 [BEEP]

Function: Enables/Disables the beeper.

Available Values: KEY+SC/KEY/OFF

Default: KEY+SC

KEY+SC: The beeper sounds when you press any key, or when the scanner stops.

KEY: The beeper sounds when you press any key.

OFF: Beeper is disabled.

Set Mode Item 7 [BELL]

Function: Selects the number of CTCSS/DCS Bell ringer repetitions.

Available Values: OFF/1T/3T/5T/8T/CONT (Continuous ringing)

Default: OFF

74	VX-177 OPERATING MANUAL

Image 76

Vertex Standard VX-177 manual Set Mode Item 1 APO, Set Mode Item 2 AR BEP, Set Mode Item 3 AR INT, Set Mode Item 4 ARS

Contents

Vertex Standard Yaesu Europe B.V Contents General Description Supplied Accessories Accessories & OptionsAvailable Options Controls & Connectors TOP & Front Panels Controls & Connectors LCD PTT Push To Talk Switch Controls & Connectors Side PanelMoni Switch Controls & Connectors Keypad Functions Press F + KEY One step or moves the memory Antenna Installation Installation of AccessoriesInstallation of FNB-83 Battery Pack Battery Charging LOW Battery Indication Belt Clip Installation Installation of FBA-25A Alkaline Battery Case Option Interface of Packet Tncs Adjusting the Audio Volume Level Switching Power on and OFFOperation Squelch Adjustment Tuning DialFrequency Navigation Direct Keypad Frequency Entry Scanning Changing the Transmitter Power Level Transmission Advanced Operation Keyboard Locking KEYPAD/LCD Illumination Disabling the Keypad Beeper Checking the Battery Voltage RF Squelch Repeater Shifts Repeater OperationAutomatic Repeater Shift ARS Changing the Default Repeater Shifts Manual Repeater Shift Activation VFO Split Mode Checking the Repeater Uplink Input Frequency Repeater Operation CTCSS/DCS/EPCS Operation Ctcss Operation DCS Operation Tone Search Scanning Storing the Ctcss Tone Pairs for Epcs Operation Epcs Enhanced Paging & Code Squelch CTCSS/DCS/EPCS Bell Operation Activating the Enhanced Paging & Code Squelch System Split Tone Operation Tone Calling 1750 HZ Storing Independent Transmit Frequencies Odd Splits Memory ModeMemory Storage Memory Recall Home Channel Memory Labeling Memories Memory Offset Tuning Deleting Memories Assigning Memories to a Memory Bank Memory Bank RecallRemoving Memories from a Memory Bank Memory Bank Operation Memory only Mode Moving Memory Data to the VFO VX-177 Operating Manual Setting the Scan-Resume Technique Scanning Programmed VFO Scan Manual VFO ScanVFO Scanning How to Skip Omit a Channel during Memory Scan Operation Memory Scanning Preferential Memory Scan Memory Bank Scan Programmable Band Limit Memory Scan PMS VFO Priority Memory Channel PriorityHome Channel Priority Priority Channel Scanning Dual Watch Priority Revert Mode VFO-VFO Dual Watch Automatic Lamp Illumination on Scan Stop Band Edge Beeper VX-177 Operating Manual Emergency Feature Emergency Channel Operation Emergency Automatic ID EAI Feature Emergency Feature Smart Search Operation Setting the Smart Search ModeStoring Smart Search Memories Internet Connection Feature Internet Connection Feature Basic Arts Setup and Operation Arts Polling Time Options Arts Alert Beep Options CW Identifier Setup Manual Dtmf Tone Generation Dtmf OperationDtmf Autodialer To send the telephone number Dtmf Pager Operation Requires Optional FTD-7 Storing the 3-digit code for the Dtmf Pager Operation Activating the Dtmf Pager Activating the ANI feature Storing the ANI code Miscellaneous Settings Password Programming the KEY Assignments Changing the Channel Steps Receive Battery Saver Setup TX Battery Saver Disabling the TX/BUSY Indicator Automatic POWER-OFF APO Feature Transmitter TIME-OUT Timer TOT Busy Channel LOCK-OUT Bclo DCS Code Inversion Changing the TX Deviation Level Reset Procedures Cloning Try again VX-177 Operating Manual SET Menu Mode ARS NET CTCSS/DSC/DTMF/EPCS Setting ANI Set Mode Item 1 APO Set Mode Item 2 AR BEPSet Mode Item 3 AR INT Set Mode Item 4 ARS Set Mode Item 8 BSY.LED Set Mode Item 9 CLK.SFTSet Mode Item 10 Cwid Set Mode Item 11 CW WRT Set Mode Item 17 DT WRT Set Mode Item 18 ECS.CDRSet Mode Item 19 ECS.CDT Set Mode Item 20 EDG.BEP Set Mode Item 22 I NET Set Mode Item 23 INT CDSet Mode Item 24 INT MR Set Mode Item 25 Lamp Set Mode Item 27 M/T-CL Set Mode Item 28 NameSet Mode Item 29 NM WRT Set Mode Item 30 Pswd Set Mode Item 33 REV/HM Set Mode Item 34 RF SQLSet Mode Item 35 RPT.MOD Set Mode Item 36 PRI.RVT Set Mode Item 39 SCN MD Set Mode Item 40 SCN.LMPSet Mode Item 41 Shift Set Mode Item 42 Skip Set Mode Item 44 SQL.TYP Set Mode Item 45 StepSet Mode Item 46 TN FRQ Set Mode Item 47 TOT Set Mode Item 51 WID.NAR Set Mode Item 52 EAISet Mode Item 53 ANI Set Mode Item 54 ANI.WRT Specifications General Installation of the FTD-7 Dtmf Paging Unit Option Declaration by Manufacturer 0511X-0K