Vertex Standard VX-177 manual Internet Connection Feature

INTERNET CONNECTION FEATURE

cess code (“#123”).

I. Press and hold in the [F] key for one second to save the setting.

2.Press the PTT switch to exit to normal operation.

3.Press the [F] key, then press the [0(SET)] key to enter the Set mode again.

4. Rotate the DIAL knob to select Set Mode Item 22: I NET.

5. Press the [F] key to enable adjustment of this Set Mode Item.

6. Rotate the DIAL knob to set this Set Mode Item to “INT.MEM” (thus activating the “Other Internet Link System” mode).

7. Press the PTT switch to save the new settings.

8. Press the [0(SET)] key momentarily to activate the Internet Con- nection feature. The “” icon will appear in the upper right corner of the display.

9. Press and hold in the [0(SET)] key for one second, rotate the DIAL knob to select the DTMF access number (“IMEM 1” ~ “IMEM 9”) corresponding to the Internet link repeater to which you wish to establish an Internet link, then press the PTT switch momentarily to lock in the selected access number.

10.Once the Internet Connection feature is activated per step 8 above,

you may now press the [0(SET)] key, while you are transmitting, to send out the selected DTMF string (to establish the link to the desired Internet-link mode).

To return to the WIRES™ mode, repeat steps 3 - 6 above, selecting “INT.COD” in step 6.

VX-177 OPERATING MANUAL 51