Vertex Standard VX-177 manual Net

SET (MENU) MODE

SET MODE ITEM		FUNCTION	AVAILABLE VALUES
			(DEFAULT: BOLD ITALIC)
21	[EMG S]	Selects the alarm(s) utilized when the Emergency function is	EMG.BEP / EMG.LMP /
		engaged.	EMG.B+L / EMG.CWT /
			EMG.C+B / EMG.C+L /
			EMG.ALL / OFF
22	[I NET]	Selects the Internet Link Connection mode.	INT.OFF / INT.COD / INT.MEM
23	[INT CD]	Selects the Access Number (DTMF digit) for WIRES™	CODE 0 - CODE 9,
		operation.	CODE A - CODE F (CODE 1)
24	[INT MR]	Selects the memory register for an Access Number (DTMF	d1 - d9
		code) for non-WIRES™
25	[LAMP]	Selects the LCD/Keypad Lamp mode.	KEY / CONT / OFF
26	[LOCK]	Selects the Control Locking lockout combination.	LK KEY / LKDIAL / LK K+D /
			LK PTT / LK P+K /
			LK P+D / LK ALL
27	[M/T-CL]	Selects the MONI switch function.	MONI / T-CALL
28	[NAME]	Toggles the display indication between “frequency” and the	FREQ / ALPHA
		channel’s “Alpha/Numeric Tag.”
29	[NM WRT]	Stores Alpha-Numeric “Tags” for the Memory channels.	---
30	[PSWD]	Enables/disables the Password feature.	PWD.OFF / PWD. ON
31	[PSWD W]	Stores the password.	---
32	[RESUME]	Selects the Scan Resume mode.	BUSY / HOLD / TIME
33	[REV/HM]	Selects the function of the [HM/RV] key.	<REV> / <HOME>
34	[RF SQL]	Adjusts the RF Squelch threshold level.	S-1 / S-2 / S-3 / S-4 / S-5 /
			S-6 / S-8 / S-FULL / OFF
35	[RPT.MOD]	Sets the Repeater Shift Direction.	RPT.OFF / RPT.– / RPT. +
36	[PRI.RVT]	Enables/disables the Priority Revert feature.	RVT.OFF / RVT. ON
37	[RXSAVE]	Selects the Receive-mode Battery Saver interval (“sleep” ratio)	200 MS / 300 MS /500 MS /
			1 SEC / 2 SSEC / OFF
38	[S SRCH]	Selects the Smart Search Sweep mode.	SINGLE / CONT
39	[SCN MD]	Selects the Memory Scan channel-selection mode.	ONLY / MEM
40	[SCN.LMP]	Enables/Disables the Scan lamp while paused.	ON / OFF
41	[SHIFT]	Sets the magnitude of the repeater Shift.	0.00 - 99.95 MHz (0.60 MHz)
42	[SKIP]	Selects the Memory Scan “Skip” channel-selection mode.	OFF / SKIP / ONLY
43	[SPLIT]	Enables/Disables split CTCSS/DCS coding.	SPL.OFF / SPL. ON
44	[SQL.TYP]	Selects the Tone Encoder and/or Decoder mode.	OFF / TONE / TSQL /
			REV TN / DCS / ECS
45	[STEP]	Setting of the synthesizer steps.	5 / 10 / 12.5 / 15 / 20 / 25 / 50
			/ 100 kHz, or AUTO
46	[TN FRQ]	Setting of the CTCSS Tone Frequency.	50 CTCSS tones (100 Hz)
47	[TOT]	Setting of the TOT time.	1MIN - 30MIN or OFF (6 MIN)
48	[TX.LED]	Enables/Disables the TX LED while the radio is transmitting.	LED. ON / LED.OFF
49	[TXSAVE]	Enables/Disables the Transmitter Battery Saver.	SAV.OFF / SAV. ON
50	[VFO.SPL]	Enables or disables “VFO Split” operation.	VSP.OFF / VSP.ON
51	[WID.NAR]	Select Wide (±5 kHz) or Narrow (±2.5 kHz) TX Deviation.	WIDE / NARROW
52	[EAI]	Enables/Disables the Emergency Automatic ID (EAI) Feature.	INT. 1M - INT.50M /
			COM. 1M-COM.50M / OFF

The following Set Mode Items will appears when the optional FTD-7 DTMF Paging Unit is installed.

SET MODE ITEM		FUNCTION	AVAILABLE VALUES
			(DEFAULT: BOLD ITALIC)
53 [ANI]		Enables/Disables the ANI function.	ANI.OFF/ANI. ON
54 [ANI.WRT]		Program the ANI Identifier.	---
55	[PAGER]	Enables/Disables the ANI function.	PAG.OFF/PAG. ON
56	[PAG.COD]	Setting the Pager Code for the DTMF Pager.	000 - 999
57 [PAG.ABK]		Enables/Disables the Answer Back function of the DTMF Pager.	ABK. OFF/ABK. ON

VX-177 OPERATING MANUAL 71