Declaration by Manufacturer | Vertex Standard VX-177 specification

1.Changes or modifications to this device not expressly approved by VERTEX STANDARD could void the user’s authorization to operate this device.

2.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference including received, interference that may cause undesired operation.

3.The scanning receiver in this equipment is incapable of tuning, or readily being altered, by the User to operate within the frequency bands allocated to the Domestic public Cellular Telecommunications Service in Part 22.

DECLARATION BY MANUFACTURER

The Scanner receiver is not a digital scanner and is incapable of being converted or modified to a digital scanner receiver by any user.

WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW.

Image 87

Vertex Standard VX-177 manual Declaration by Manufacturer

Contents

Yaesu Europe B.V Vertex Standard Contents General Description Accessories & Options Supplied AccessoriesAvailable Options Controls & Connectors TOP & Front Panels Controls & Connectors LCD Controls & Connectors Side Panel PTT Push To Talk SwitchMoni Switch Press F + KEY Controls & Connectors Keypad Functions One step or moves the memory Installation of Accessories Antenna InstallationInstallation of FNB-83 Battery Pack LOW Battery Indication Battery Charging Installation of FBA-25A Alkaline Battery Case Option Belt Clip Installation Interface of Packet Tncs Switching Power on and OFF Adjusting the Audio Volume LevelOperation Tuning Dial Squelch AdjustmentFrequency Navigation Scanning Direct Keypad Frequency Entry Transmission Changing the Transmitter Power Level Keyboard Locking Advanced Operation Disabling the Keypad Beeper KEYPAD/LCD Illumination RF Squelch Checking the Battery Voltage Repeater Operation Repeater ShiftsAutomatic Repeater Shift ARS Manual Repeater Shift Activation Changing the Default Repeater Shifts Checking the Repeater Uplink Input Frequency VFO Split Mode Repeater Operation Ctcss Operation CTCSS/DCS/EPCS Operation DCS Operation Tone Search Scanning Epcs Enhanced Paging & Code Squelch Storing the Ctcss Tone Pairs for Epcs Operation Activating the Enhanced Paging & Code Squelch System CTCSS/DCS/EPCS Bell Operation Tone Calling 1750 HZ Split Tone Operation Memory Mode Storing Independent Transmit Frequencies Odd SplitsMemory Storage Home Channel Memory Memory Recall Labeling Memories Deleting Memories Memory Offset Tuning Memory Bank Operation Assigning Memories to a Memory BankMemory Bank Recall Removing Memories from a Memory Bank Moving Memory Data to the VFO Memory only Mode VX-177 Operating Manual Scanning Setting the Scan-Resume Technique Manual VFO Scan Programmed VFO ScanVFO Scanning Memory Scanning How to Skip Omit a Channel during Memory Scan Operation Preferential Memory Scan Memory Bank Scan Programmable Band Limit Memory Scan PMS Priority Channel Scanning Dual Watch VFO PriorityMemory Channel Priority Home Channel Priority VFO-VFO Dual Watch Priority Revert Mode Band Edge Beeper Automatic Lamp Illumination on Scan Stop VX-177 Operating Manual Emergency Channel Operation Emergency Feature Emergency Automatic ID EAI Feature Emergency Feature Setting the Smart Search Mode Smart Search OperationStoring Smart Search Memories Internet Connection Feature Internet Connection Feature Basic Arts Setup and Operation Arts Alert Beep Options Arts Polling Time Options CW Identifier Setup Dtmf Operation Manual Dtmf Tone GenerationDtmf Autodialer To send the telephone number Storing the 3-digit code for the Dtmf Pager Operation Dtmf Pager Operation Requires Optional FTD-7 Activating the Dtmf Pager Storing the ANI code Activating the ANI feature Password Miscellaneous Settings Changing the Channel Steps Programming the KEY Assignments TX Battery Saver Receive Battery Saver Setup Automatic POWER-OFF APO Feature Disabling the TX/BUSY Indicator Busy Channel LOCK-OUT Bclo Transmitter TIME-OUT Timer TOT DCS Code Inversion Changing the TX Deviation Level Reset Procedures Try again Cloning VX-177 Operating Manual ARS SET Menu Mode NET CTCSS/DSC/DTMF/EPCS Setting ANI Set Mode Item 4 ARS Set Mode Item 1 APOSet Mode Item 2 AR BEP Set Mode Item 3 AR INT Set Mode Item 11 CW WRT Set Mode Item 8 BSY.LEDSet Mode Item 9 CLK.SFT Set Mode Item 10 Cwid Set Mode Item 20 EDG.BEP Set Mode Item 17 DT WRTSet Mode Item 18 ECS.CDR Set Mode Item 19 ECS.CDT Set Mode Item 25 Lamp Set Mode Item 22 I NETSet Mode Item 23 INT CD Set Mode Item 24 INT MR Set Mode Item 30 Pswd Set Mode Item 27 M/T-CLSet Mode Item 28 Name Set Mode Item 29 NM WRT Set Mode Item 36 PRI.RVT Set Mode Item 33 REV/HMSet Mode Item 34 RF SQL Set Mode Item 35 RPT.MOD Set Mode Item 42 Skip Set Mode Item 39 SCN MDSet Mode Item 40 SCN.LMP Set Mode Item 41 Shift Set Mode Item 47 TOT Set Mode Item 44 SQL.TYPSet Mode Item 45 Step Set Mode Item 46 TN FRQ Set Mode Item 54 ANI.WRT Set Mode Item 51 WID.NARSet Mode Item 52 EAI Set Mode Item 53 ANI General Specifications Installation of the FTD-7 Dtmf Paging Unit Option Declaration by Manufacturer 0511X-0K