| SPECIFICATIONS |
|
|
General |
|
Frequency Ranges: | RX 430 - 440 MHz or 420 - 470 MHz |
| TX 430 - 440 MHz or 430 - 450 MHz |
Channel Steps: | 5/10/12.5/15/20/25/50/100 kHz |
Frequency Stability: | ±5 ppm @ 14 °F to +140 °F |
Repeater Shift: | ±5 MHz, ±7.2 MHz, or ±1.6 MHz |
Emission Type: | F2D, F3E |
Antenna Impedance: | 50 Ω |
Supply Voltage: | Nominal: 7.2 V DC |
(Negative Ground) | Operating: 6.0 ~ 16.0 V DC (EXT DC Jack) |
11.0~ 16.0 V DC (EXT DC Jack with Charging)
Current Consumption: 130 mA (Receive, 200 mW output)
(Approx. @7.2 V) | 50 mA (Standby, Saver Off) |
| 22 mA (Standby, Saver On) |
| 8 mA (Auto Power Off) |
| 1.8 A (5 W TX) |
Operating Temperature: | |
Case Size: | 2.36” (W) x 4.72” (H) x 1.26” (D) (60 x 120 x 32 mm) |
| w/o knob, antenna, & belt clip |
Weight: | 13.8 Oz (390 g) with |
Transmitter
RF Power Output: 5.0 W (High) / 2.0 W (Middle) / 0.5 W (Low) (@7.2 V)
Modulation Type: Variable Reactance F2D, F3E
Maximum Deviation: ±5.0 kHz (F2D, F3E)
Spurious Emission: At least 60 dB down (@ High and Middle power) At least 40 dB down (@ Low power)
Microphone Impedance: 2 kΩ
Receiver
Circuit Type: | |
Intermediate Frequencies: 1st: 47.25 MHz | |
| 2nd: 450 kHz |
Sensitivity: | 0.2 µV for 12 dB SINAD |
Selectivity: | 12 kHz/35 kHz |
AF Output: | 700 mW @ 16 Ω for 10 % THD (Internal Speaker) |
(@ 7.5 V) | 400 mW @ 8 Ω for 10 % THD (EXT SP Jack) |
Specifications are subject to change without notice, and are guaranteed within the 430 MHz amateur band only. Frequency ranges and functions will vary according to trans- ceiver version; check with your dealer.
| 83 |
