Vertex Standard VX-177 Set Mode Item 8 BSY.LED, Set Mode Item 9 CLK.SFT, Set Mode Item 10 Cwid

SET (MENU) MODE

Set Mode Item 8 [BSY.LED]

Function: Enables/Disables the BUSY LED while the Squelch is open.

Available Values: LED. ON/LED.OFF

Default: LED. ON

Set Mode Item 9 [CLK.SFT]

Function: Shifting of the CPU clock frequency.

Available Values: SFT.OFF/SFT. ON

Default: SFT.OFF

This function is only used to move a spurious response “birdie,” should it fall on a desired frequency.

Set Mode Item 10 [CWID]

Function: Enables/disables the CW identifier during ARTS operation.

Available Values: TX OFF/TX ON

Default: TX OFF

Set Mode Item 11 [CW WRT]

Function: Programs and activates the CW Identifier (used during ARTS operation). See page 52 for details.

Set Mode Item 12 [DC VLT]

Function: Indicates the DC Supply Voltage.

Set Mode Item 13 [DCS.COD]				DCS CODE
Function: Setting of the DCS code.	023	025	026	031	032	036	043	047	051	053
	054	065	071	072	073	074	114	115	116	122
Available Values: 104 standard DCS codes
	125	131	132	134	143	145	152	155	156	162
Default: DCS.023	165	172	174	205	212	223	225	226	243	244
Set Mode Item 14 [DCS.N/R]	245	246	251	252	255	261	263	265	266	271
	274	306	311	315	325	331	332	343	346	351
Function: Enables/Disables “Inverted” DCS	356	364	365	371	411	412	413	423	431	432
code decoding.	445	446	452	454	455	462	464	465	466	503
	506	516	523	526	532	546	565	606	612	624
Available Values: T/RX N, RX R, TX R,
	627	631	632	654	662	664	703	712	723	731
T/RX R	732	734	743	754	–	–	–	–	–	–

Default: T/RX N

Set Mode Item 15 [DT DLY]

Function: Setting of the DTMF Autodialer Delay Time.

Available Values: 50MS/100MS/250MS/450MS750MS/1000MS

Default: 450MS

Set Mode Item 16 [DT SPD]

Function: Setting of the DTMF Autodialer Sending Speed.

Available Values: 50MS (high speed)/100MS (low speed)

Default: 50MS

VX-177 OPERATING MANUAL 75