Vertex Standard VX-177 manual CTCSS/DSC/DTMF/EPCS Setting

SET (MENU) MODE

REPEATER SETTING	SET MODE ITEM		AVAILABLE VALUES (DEFAULT)
Enables/Disables the Automatic Repeater Shift function.	4 [ARS]		ARS. ON / ARS.OFF
Sets the Repeater Shift Direction.	35	[RPT.MOD]	RPT.OFF / RPT. – / RPT. + (￿)
Sets the magnitude of the repeater Shift.	41	[SHIFT]	0.00 - 99.95 MHz (￿)
CTCSS/DSC/DTMF/EPCS SETTING	SET MODE ITEM		AVAILABLE VALUES (DEFAULT)
Selects the number of CTCSS/DCS Bell ringer repetitions.	7 [BELL]		OFF / 1T / 3T / 5T / 8T / CONT
Setting of the DCS code.	13	[DCS.COD]	104 standard DCS codes (023)
Enables/Disables “Inverted” DCS code decoding.	14	[DCS.N/R]	T/RX N, RX R, TX R, T/RX R
Setting of the DTMF Autodialer Delay Time.	15	[DT DLY]	50MS / 100MS / 250MS / 450MS /
			750MS / 1000MS
Setting of the DTMF Autodialer Sending Speed.	16	[DT SPD]	50MS /100MS
Programming of the DTMF Autodialer.	17 [DT WRT]		–
Setting the Receiver Pager Code for the Enhanced CTCSS	18	[ECS.CDR]	(R05_47)
Paging & Code Squelch.
Setting the Transmitting Pager Code for the Enhanced	19	[ECS.CDT]	(T05_47)
CTCSS Paging & Code Squelch.
Enables/Disables split CTCSS/DCS coding.	43	[SPLIT]	SPL.OFF / SPL. ON
Selects the Tone Encoder and/or Decoder mode.	44	[SQL.TYP]	OFF / TONE / TSQL /
			REV TN / DCS
Setting of the CTCSS Tone Frequency.	46	[TN FRQ]	50 standard CTCSS tones (100 Hz)
ARTS SETTING	SET MODE ITEM		AVAILABLE VALUES (DEFAULT)
Selects the Beep option during ARTS operation.	2 [AR BEP]		INRANG / ALWAYS / OFF
Selects the Polling Interval during ARTS operation.	3 [AR INT]		25 SEC / 15 SEC
Enables/disables the CW identifier during ARTS operation.	10	[CWID]	TX OFF / TX ON
Programs and activates the CW Identifier (used duringARTS	11 [CW WRT]		–
operation).
MEMORY SETTING	SET MODE ITEM		AVAILABLE VALUES (DEFAULT)
Toggles the display indication between “frequency” and the	28	[NAME]	FREQ / ALPHA
channel’s “Alpha/Numeric Tag.”
Stores Alpha-Numeric “Tags” for the Memory channels.	29	[NM WRT]	–
SCAN SETTING	SET MODE ITEM		AVAILABLE VALUES (DEFAULT)
Selects the Scan Resume mode.	32	[RESUME]	BUSY / HOLD / TIME
Enables/disables the Priority Revert feature.	36	[PRI.RVT]	RVT.OFF / RVT. ON
Selects the Memory Scan channel-selection mode.	39	[SCN MD]	ONLY / MEM
Enables/Disables the Scan lamp while paused.	40	[SCN.LMP]	ON / OFF
Selects the Memory Scan “Skip” channel-selection mode.	42	[SKIP]	OFF / SKIP / ONLY
POWER SAVER SETTING	SET MODE ITEM		AVAILABLE VALUES (DEFAULT)
Selects the Receive-mode Battery Saver interval (“sleep”	37	[RXSAVE]	200 MS / 300 MS / 500 MS /
ratio).			1 S / 2 S / OFF
Enables/Disables the Transmitter Battery Saver.	49	[TXSAVE]	SAV.OFF / SAV. ON
WIRES™ SETTING	SET MODE ITEM		AVAILABLE VALUES (DEFAULT)
Selects the Internet Link Connection mode.	22	[I NET]	INT.OFF / INT.COD / INT.MEM
Selects the Access Number (DTMF digit) for WIRES™ op-	23	[INT CD]	CODE 0 - CODE 9,
eration.			CODE A - CODE F, (CODE 1)
Selects the memory register for an Access Number (DTMF	24	[INT MR]	d1 - d9
digit) for non-WIRES™.

72 VX-177 OPERATING MANUAL