Vertical Communications 8412S, 8412F manual Using Your Headset

Introducing The Large Screen Speakerphone GCA70–349

1.3Using Your Headset

NOTE: The Comdial Impact SCS-AM and Impact SCS-AB headsets are designed for use with the Impact SCS 8412F-** and 8412S-** speakerphones. Comdial authorizes only these headsets for use with the Impact SCS line of telephones.

If you install the optional headset on your telephone, you will be able to quickly switch between handset and headset use with the “quick disconnect” cord supplied with your headset.

•To install the Comdial headset,

1.Turn your telephone over and locate the handset/headset jack on the bottom of the telephone.

2.Unplug the handset cord from its modular jack and remove the cord from its routing channel.

3.Plug the quick disconnect cord into the modular handset/headset jack on the bottom of the telephone and route it through the routing channel. (Make sure the section of cord you plug into the telephone jack has the female receptor jack.)

4.Plug the male end of the headset cord into the female end of the quick disconnect cord.

•To switch from headset operation to handset operation,

1.Unplug the handset cord from the modular jack in the handset.

2.Plug the quick disconnect cord into the modular jack on the handset. (Make sure the section of cord you plug into the handset jack has the male part of the quick disconnect jack.)

3.Disconnect the male connector of the headset at the quick disconnect plug.

4.Plug the male end of the handset cord into the female end of the quick disconnect cord.

1 – 8 Large Screen Speakerphone Manual