Using The Other Telephone Features |
7.14Setting A Do Not Disturb Condition At Your Station
This feature keeps calls from ringing at your LCD speakerphone and makes your station appear to be busy to intercom calls. If your installer has programmed your station to have this feature, you can enable it as needed.
Generally, callers cannot override this feature. They hear two quick tone bursts every two seconds when they call a telephone that is set to the do not disturb mode. However, the installer may program some telephones with the ability to override a do not disturb condition at another telephone.
You can program a permanent do not disturb button to provide yourself with quick access to this feature if you wish. See the programming section of this user’s guide for details.
•To enable or disable the Do Not Disturb, proceed as follows:
1.Press OPTIONS, then press PROGRAMMING.
2.Press the DO NOT DISTURB (to the right of the LCD) to toggle the Do Not Disturb feature on or off.
3.Press EXIT.
•To set a do not disturb condition at your telephone when a call rings at your station,
1.Hear ringing and notice incoming call information in display.
2.Select DO NOT DISTURB option. Ringing will stop, caller will hear the do not disturb tone, and your telephone will remain in DND until you disable the feature (described above).
•To override a do not disturb condition at another telephone, use the procedure detailed in section 3.10.
7 – 12 Large Screen Speakerphone Manual
