Custom Message
To change the banner message, press the SELECT button. If you don’t want to change the banner message press the bottom button.
SET
SELECT
FUNCTION
Press the SELECT button to change banner message.
Press the bottom button to skip to the next function.
If the SELECT button was pressed, the following will appear in the display window:
^
The “^” is pointing to the first character on the top line. Press the SET button to scroll one direction through the character set, or press the SELECT button to scroll the other direction. The entire alphabet, numbers and punctuation are included.
SET
Press the SET button to scroll through the character set in one direction.
SELECT
FUNCTION
Press the SELECT button to scroll in the opposite direction.
Press the bottom button to enter the character displayed and to move to the next position.
After programming the top line (maximum 10 characters), continue this process for the bottom line and the initiating zones. To keep the initiating zones as “ZONE 1”, etc., press the bottom button when they are displayed.
When finished with the last zone, the following will appear in the display window:
N E W P A S S W O R D = 0 0 0
^
This allows the user to change the password. All panels are shipped from the factory with a password of 000.
SET
SELECT
FUNCTION
Press the SET button to set the displayed number and move to the next space.
Press the SELECT button to scroll through the numbers.
Press the bottom button to skip this function.
When finished with this section, the following will appear in the display window:
P | U | S | H |
| P | R | O | G | R | A | M | M | I | N | G |
S | W | I | T | C | H |
| B | A | C | K |
| U | P |
|
|
Quit by returning the programming switch to the up position. The system is now ready for operation.
48
