Manuals / Viking / Household Appliance / Smoke Alarm

Viking instruction manual VFR-400/PFC-7500Interconnection Drawing, Panel Panel

Models: VFR-400

1 58

Download 58 pages 63.79 Kb

Page 58

PANEL PANEL

VFR-400 • 5403548 • REV D • 10/07

Connection Procedure for Battery Charging Current and Voltage

1) To measure the battery charging voltage:

Place a voltmeter across the battery terminals as shown in FIG. 4

2) To measure the battery charging current:

Place a current meter in series with the battery terminals as shown in FIG. 5.

PANEL PANEL

VOLT	CURRENT
METER	METER
	DWG# 3527-9

Connection Drawing for Central Station and Remote Station Operation

VFR-400/PFC-7500 Interconnection Drawing

**Or other UL864 9th Edition listed stand alone DACT connected as shown and installed in the same room within 20 feet of the VFR-400 and with interconnecting wiring in conduit.

See PFC-7500 Manual 8910225 for programming information.

See PFC-7500 Manual 8910227 for installation instructions.

Note:PFC-7500 requires RA-7690 LCD Annunciator for programming.

The VFR-400 and PFC-7500 shall be installed in the same room within 20 feet of each other and the interconnecting wires shall be in conduit.

			MAIN	PFC-7500
			MAIN	BACKUP
			J4	J5
			TELEPHONE CONNECTIONS
							U21
							EPROM SOCKET
					OUTPUT 1	OUTPUT 2
						J11	1
							2
							3
120 VAC	AC AC B+	BO	RED YEL	GRN BLK Z1A+ Z1A- Z1B+ Z1B- Z2+ Z2- Z3+ Z3- Z4+ Z4- Z5+ Z5-	N/C COM N/O N/C COM N/O		4
	AC AC B+	BO	RED YEL	GRN BLK Z1A+ Z1A- Z1B+ Z1B- Z2+ Z2- Z3+ Z3- Z4+ Z4- Z5+ Z5-	N/C COM N/O N/C COM N/O		J12
	WLT						J12
60 HZ	WLT
60 HZ	TRANSFORMER
350mA	S S			S S S S S S S S S S S S
	S S			S S S S S S S S S S S S

AC MODE

ZONE 1

3.3K EOLR

ZONE 2

3.3K EOLR'S FROM PFC-7500

ZONE 3

ZONE 4

58

Image 58

Viking instruction manual VFR-400/PFC-7500Interconnection Drawing, Panel Panel

Contents

VFR-400 Installation, Operation, and Instruction ManualReleasing Panel for Sprinkler Systems Contents Notes VFR-400• 5403548 • REV D • 10/07Operating Instructions Form Fire Alarm System LimitationsGeneral Description System FeaturesDesign Guidelines ·Alarm ZonesOptions SpeciﬁcationsCircuit Parameters VFR-400Visual IndicatorsControl Buttons Initiating Device ZonesBackup Power Requirements Low/Missing BatteryInput Power Dedicated Supervisory ZonesOptional Accessories Service UseAuxiliary Power Initiating Device Circuits Alarm ConditionTrouble Conditions Low Air AlarmSupervisory Notiﬁcation Appliance/Releasing CircuitsLow Battery Voltage Ground FaultLoss Or Reduction Of AC Power Loss Of Auxiliary Power OutputTo Reset A Trouble Condition To Silence A Signaling ApplianceTo Reset an Alarm or Supervisory Condition Lamp TestTest Procedure Test Procedure CanadaHistory Programming Mode InstructionsPanel Visual Display SET SELECT FUNCTIONSET SELECT FUNCTION PasswordDate/Time SELECT FUNCTION SET SELECT FUNCTIONSET SELECT FUNCTION Zone Disabled/EnabledSET SELECT FUNCTION Not available on Supervisory Zones Sup 1 or Sup One Man WalktestVFR-400Standard Program Information SET SELECT FUNCTIONOutputs SELECT FUNCTIONThis page intentionally left blank VFR-400• 5403548 • REV D • 10/07PROGRAM #1 2.Connect one circuit at a time and apply AC power PROGRAM #2 2.Connect one circuit at a time and apply AC power PROGRAM #3 2.Connect one circuit at a time and apply AC power PROGRAM #4 2.Connect one circuit at a time and apply AC power PROGRAM #5 2.Connect one circuit at a time and apply AC power PROGRAM #6 2.Connect one circuit at a time and apply AC power PROGRAM #7 2.Connect one circuit at a time and apply AC power PROGRAM #8 2.Connect one circuit at a time and apply AC power PROGRAM #9 2.Connect one circuit at a time and apply AC power PROGRAM #10 2.Connect one circuit at a time and apply AC power PROGRAM #11 2.Connect one circuit at a time and apply AC power PROGRAM #12 2.Connect one circuit at a time and apply AC power VFR-400• 5403548 • REV D • 10/07 CUSTOM PROGRAM ZONESOUTPUTS #1 #2 #3 #4 + - + - + - + +Initiating Zone Description VFR-400Custom Program InformationSET SELECT FUNCTION SELECT FUNCTION Soak Timer DescriptionSET SELECT FUNCTION SELECTSELECT Normal/Cross-ZoningSELECT FUNCTION FUNCTIONSELECT FUNCTION Custom MessageSELECT FUNCTION SET SELECT FUNCTIONInstallation Instructions Alarm ZonesSupervisory Zones VFR-400False Front Removal/Assembly Drawing Wire CheckoutMounting Instructions Inactive Circuits Battery Size CalculationsBattery Size Requirements And Maintenance Operating Instructions FormAlarm Time SECONDARY POWER SUPPLY REQUIREMENTSService Use TABLETypical Style B Class B Wiring Using SB-46Base Typical Firecycle WiringTypical 2 Wire Detector Connection Drawing Typical Style D Class A WiringVFR-400• 5403548 • REV D • 10/07 Identiﬁer AVFR-400Connection Drawing Fenwal Max. No. Of Detectors Per Zone Is ESL Max. No. Of Detectors Per Zone IsHochiki Max. No. Of Detectors Per Zone Is Potter Max. No. Of Detectors Per Zone IsWire Routing for VFR-400 Releasing Device CompatibilityVFR-400• 5403548 • REV D • 10/07 VFR-400/PFC-7500Interconnection Drawing PANEL PANEL