SCANNING WITH THE TWAIN INTERFACE 77
Scanning from ISIS
You can use the ISIS interface from QuickScan™ or any other application that will access the ISIS driver. The QuickScan Demo software was provided with your scanner.
Note that the ISIS interface for each application varies depending on the application. Please refer to that software application’s User Guide for instructions on scanning the ISIS interface. The QuickScan User’s Guide is available on the installation disc that you received with the scanner.
ACCESSING THE ISIS INTERFACE FROM QUICKSCAN
Open the QuickScan software to access the ISIS driver scanning options. Please note that you may see the following warning message:
1.Please disregard the message and click Continue.
The ISIS drivers were installed correctly during the installation of your scanner.
2.The Scanner Selection dialog box will then appear.
Select Visioneer Strobe XP 450 from the list of scanners and click OK.
3.QuickScan is now ready to scan using your scanner.
