VIVOTEK
A green bar indicates that even though motions have been detected, the event has not been triggered because the image variations still fall under the defined threshold.
Percentage = 30%
If you want to configure specific motion detection settings individually for day/night/schedule operations, please click Profile to open the Motion Detection Profile Settings page as shown below. A total of three motion detection windows can be configured on this page as well.
2011/03/21 17:08:56
Please follow the steps beolw to set up a profile: 1� Create a new motion detection window�
2� Check Enable this profile�
3� Select the applicable mode: Day mode, Night mode, or Schedule mode� Please manually enter a time range if you prefer the Schedule mode�
4� Click Save to enable the settings and click Close to exit the page�
This motion detection window will also be displayed on the Event settings page� You can go to Event > Event settings > Trigger to choose it as a trigger source� Please refer to page 90 for detailed information�
User's Manual - 103
