Vivotek 62E, FD8362 manual IR cut control, Image setting per channel

VIVOTEK

maxgain	0~100	100	4/4	Manual set maximum gain
				value.
mingain	0~100	0	4/4	Manual set minimum gain value.
autoiris	<boolean>	0	4/4	Enable auto Iris.
				(not used in FD8362E)

7.10 IR cut control

Group: ircutcontrol (capability.nvideoinprofile > 0)

NAME	VALUE	DEFAULT		SECURITY	DESCRIPTION
				(get/set)
mode	auto,	auto	6/6		Set IR cut control mode
	day,
	night,
	di,
	schedule
	<product
	dependent>
daymodebegintime	00:00~23:5	07:00	6/6		Day mode begin time
	9
daymodeendtime	00:00~23:5	18:00	6/6		Day mod end time
	9
bwmode	<boolean>	1	6/6		Switch to B/W in night mode if
					enabled
sensitivity	low,	normal	6/6		Sensitivity of light sensor
	normal,
	high

7.11 Image setting per channel

Group: image_c<0~(n-1)>for n channel products

NAME	VALUE	DEFAULT	SECURITY	DESCRIPTION
			(get/set)
brightness	-5~5	-5	4/4	Adjust brightness of image
				according to mode settings.
saturation	-5~5,100	0	4/4	Adjust saturation of image
				according to mode settings.
				100 for saturation percentage
				mode.

User's Manual - 145