VIVOTEK

Wall Mount

1� Attach the supplied alignment sticker to the wall�

2� Using the circle marks on the sticker, drill at least 2 pilot holes symmetrically on each side into the wall� Then hammer the four supplied plastic anchors into the holes�

3� Through three or four holes on the mounting plate, insert the supplied screws into the corre- sponding holes and secure the mounting plate with a screwdriver�

4� Feed the cables through the triangular cutout A or side opening B� If you want to use hole B, remove the side cover using a screwdriver� Secure the camera base to the mounting plate with three supplied screws�

5� Remove the black cover�

1

3

2

A

4

B

5

Black Cover�

12 - User's Manual

Page 12
Image 12
Vivotek FD8362, 62E manual Wall Mount