VIVOTEK
Based on the live image retrieved from the camera, adjust the camera lens to the desired view
angle:
1� Loosen the tilt adjustment screws and then turn the lens module up or down� Upon completion, tighten the screw�
2� Turn the lens to adjust the image orientation�
1 |
| Vertical Tilt |
2 | 80° |
Lens Horzontal Pan 350°
Horizontal
Pan 350°
3-axis Mechanism Design
IMPORTANT:
Zoom and Focus adjustment is made via the Remote Focus function on your web browser session with the camera There is no mechanical adjustment bars on the camera Click here to see description for it on page 79
Completion
1� Install the black cover�
2� Attach the dome cover to the camera by combining it to the retainer and aligning with the mounting holes�
3� Secure the four dome screws with the supplied hex key wrench� Make sure all parts of the camera are securely installed�
1
2
3
NOTE:
3
Please tear down the aluminum foil vacuum bag and take out the moisture absorber, then replace it with one that came within the accessory bag using a double- sided tape
18 - User's Manual
