Vivotek 62E, FD8362 - page 143

VIVOTEK

User's Manual - 143

maxgain 0~100 100 4/4 Manual set maximum gain

value.

mingain 0~100 0 4/4 Manual set minimum gain value.

autoiris <boolean> 0 4/4 Enable auto Iris.

(not used in FD8362E)

enablewdr <boolean> 0 4/4 Enable/disable wield dynamic

range. (not used in FD8362E)

whitebalance auto, manual manual 4/4 “auto” indicates auto white

balance.

“manual” indicates keep current

value.

rgain 0~100 52 4/4 Manual set rgain value of gain

control setting.

bgain 0~100 47 4/4 Manual set bgain value of gain

control setting.

irismode

fixed, indoor,

outdoor

fixed 4/4 Video Iris for DC Iris.

piris_mode manual, indoor,

outdoor

indoor 1/4 P-Iris mode.

piris_sensitivity 1~10 4 4/4 P-Iris sensitivity for indoor and

outdoor mode.

piris_response 1~10 2 4/4 P-Iris response time for indoor

and outdoor mode.

piris_position 1~100 12 1/4 P-Iris position for manual mode.

wdrc_mode 0~3 0 4/4 WDR enhanced.

0: off

1: auto

2: always on

3: keep current value

wdrc_strength 0~2 1 4/4 WDR enhanced.

0: low

1: medium

2: high

Contents

Main Page Page Overview Read Before Use Package Contents Symbols and Statements in this Document i Physical Description General I/O Terminal Block Inner View NOTE: The heater is only available on FD8362E i DI/DO Diagram Hardware Reset SD/SDHC Card Capacity Hardware Installation Page Page A B Network Deployment Setting up the Network Camera over the Internet Set up the Network Camera through Power over Ethernet (PoE) Page Software Installation Ready to Use Page Accessing the Network Camera Using Web Browsers For more information about how to enable password protection, please refer to Security on page 42 Using RTSP Players Using 3GPP-compatible Mobile Devices Using VIVOTEK Recording Software Main Page Conguration Area Hide Button Resize Buttons Live Video Window The following window is displayed when the video mode is set to H264 / MPEG-4: Page The following window is displayed when the video mode is set to MJPEG: Client Settings Page Conguration System > General settings System time System > Homepage layout Theme Options Page System > Logs System > Parameters System > Maintenance Page Page Page Security > User Account Security > HTTPS (Hypertext Transfer Protocol over SSL) Page Page Page Page Security > Access List Filter Page Security > IEEE 802.1x Advanced Mode 1 2 3 Page Network > General settings PPPoE (Point-to-point over Ethernet) Page Page Page Page Port Page Network > Streaming protocols HTTP streaming Page Page Page Network > QoS (Quality of Service) Advanced Mode Page Network > DDNS Page Page Network > SNMP (Simple Network Management Protocol) Media > Image Day/Night Settings Preference Sensor Setting 2: For special situations Sensor Setting 1: For normal situations Page Page Exposure Page Page Page Page Media > Video Stream settings Page Page Media > Audio Audio Settings PTZ > PTZ settings Page Page Event > Event settings Page Page Add server Page Page Page Add media Page Page Page Page Applications > Motion detection Page Page Applications > DI and DO Applications > Tampering detection Recording > Recording settings Page Page Page Page Local storage > SD card management Local storage > Content management Page Appendix URL Commands for the Network Camera 1. Overview 2. Style Convention 2. Style Convention 3. General CGI URL Syntax and Parameters 4. Security Level 5. Get Server Parameter Values Example: Request IP address and its response 6. Set Server Parameter Values [<parameter pair>] Only the parameters that you set and are readable will be returned. 7. Available parameters on the server 7.1 system Page Page Page Page 7.1.1 system.info 7.2 status 7.3 digital input behavior define 7.4 digital output behavior define 7.5 security 7.6 network Page 7.6.1 802.1x 7.6.2 QOS Page 7.6.3 IPV6 7.6.4 FTP 7.6.5 HTTP 7.6.6 HTTPS port 7.6.7 RTSP 7.6.7.1 RTSP multicast 7.6.8 SIP port 7.6.9 RTP port 7.6.10 PPPoE 7.7 IP Filter 7.8 Video input 7.8.1 Video input setting per channel Page Page Page Page 7.8.1.1 Alternative video input profiles per channel Page 7.9 Video input preview 7.10 IR cut control 7.11 Image setting per channel Page 7.12 Image setting for preview 7.13 Exposure window setting per channel 7.14 Audio input per channel 7.15 Time Shift settings 7.16 Motion detection settings 7.17 Tempering detection settings 7.18 DDNS 7.19 Express link 7.20 UPnP presentation 7.21 UPnP port forwarding 7.22 System log 7.23 SNMP 7.24 Layout configuration 7.25 Privacy mask 7.26 Capability Page Page Page Page Page 7.27 Customized event script 7.28 Event setting Page Page 7.29 Server setting for event action 7.30 Media setting for event action 7.31 Recording Page 7.32 HTTPS 7.33 Storage management setting 7.34 Region of interest 7.35 ePTZ setting 7.36 Focus Window setting 8. Useful Functions 8.1 Drive the Digital Output (capability.ndo > 0) 8.2 Query Status of the Digital Input (capability.ndi > 0) 8.3 Query Status of the Digital Output (capability.ndo > 0) 8.4 3D Privacy Mask 8.5 Capture Single Snapshot 8.6 Account Management 8.7 System Logs 8.8 Upgrade Firmware 8.9 ePTZ Camera Control (capability.eptz > 0) Page 8.10 ePTZ Recall (capability.eptz > 0) 8.11 ePTZ Preset Locations (capability.eptz > 0) 8.12 IP Filtering 8.13 Event/Control HTTP Tunnel Channel (capability. evctrlchannel > 0) 8.14 Get SDP of Streams 8.15 Open the Network Stream 8.16 Storage managements (capability.storage.dbenabled > 0) Page Page 8.17 Virtual input (capability.nvi > 0) Page Page 8.19 Open Anystream (capability.nanystream > 0) Page 8.20 Remote Focus Technical Specications Specications Dimension Approvals LED Indicator Technology License Notice MPEG-4 AAC Technology MPEG-4 Visual Technology AMR-NB Standard Electromagnetic Compatibility (EMC)