VIVOTEK

Auto: If you set Exposure mode as Auto, the Exposure time and Gain control will be not configurable since the sensor library will automatically adjust the value according to the ambient light� Then you can set iris mode as "indoor" or "outdoor" to reach the best image quality�

You can click Preview to fine-tune the image, or click Restore to recall the original settings without incorporating the changes� When completed with the settings on this page, click Save to enable the settings�

If you want to configure another sensor setting for day/night/schedule mode, please click Profile to open the Profile settings page as shown below.

2011/03/13 17:08:56

Please follow the steps below to setup a profile: 1� Check Enable and apply this profile

2� Select the applied mode: Day mode, Night mode, or Schedule mode� Please manually enter a range of time through which you want the Schedule mode to apply�

3.Configure Exposure control settings in the folowing columns. Please refer to the previous page for detailed information�

4� Click Save to enable the setting and click Close to exit the page�

78 - User's Manual

Page 78
Image 78
Vivotek FD8362, 62E manual 2011/03/13