www vtechphones com 9
Getting started
The wall mount brackets are design ed for use on standard wall mount plates onl y
1 Plug the connector of the base power adaptor to the connector jack at the bottom of the base unit
Then plug the adaptor into an elec trical outlet.
2 Connect the tel ephone line cord to the jack at the bottom of the base unit, and th e other end to
the wall jack
3 Line up the tabs on the wall mount adaptors with the holes at the bot tom of the base unit/back of
the charger. Snap the wall mount bracket r mly in place.
4. Mount the base unit on the wall . Position the base unit so that the mountin g studs will t into the
holes on the wall mount bracket Slide base unit down on the m ounting studs until it locks into
place
Wall mounting (optional)