•You can choose to set the time manually following the instruction on this page, or you can allow it to be set automatically with incoming caller ID information. Caller ID is a subscription service, fee required.
•In the event of a power outage, the day and time will need to be reset.
28
Answering system operation
Before using the answering system, you should follow the steps to set the day and time, so messages are dated correctly.
1.Press TIME/SET, the system announces the current setting.
2.Press TIME/SET again.
3.The answering system will announce the day of the current day setting. Press CHANGE on the base until you hear the correct setting.
4.Press TIME/SET, the system announces the current hour setting.
5.Press CHANGE until you hear the correct hour.
6.Press TIME/SET, the system announces the current minute setting
7.Press CHANGE until you hear the correct minute.
8.Press TIME/SET, the system announces the current year setting.
9.Press CHANGE until you hear the correct year.
10.Press TIME/SET to confirm, the system will announce the new setting. You’ll hear a confirmation tone.
Pressing and holding the CHANGE button when setting the time and date will advance the minutes or years by increments of 10.
To check day and time
Press TIME/SET at any time to listen to the current setting without changing it.
www.vtechphones.com
