Answering system operation
Purpose | Press | Action to follow | ||
|
|
| ||
Stop | 5 | Press to stop messages from being played. | ||
|
|
|
| |
Skip a message | 6 | Press to skip to the next message. | ||
|
|
| ||
Review Announcement | #7 | Listen to current outgoing announcement. | ||
|
|
|
| |
| *7 | Press after hearing the beep. Record your new | ||
Record Announcement | announcement. Press 5 to stop recording. The system will | |||
|
| play back the announcement for confirmation. | ||
| 8 | Press after hearing the beep. Speak after the system | ||
Record Memo | announces “Record after the tone. Press STOP when you | |||
|
| are done.” Start recording your memo. Press 5 to stop. | ||
|
|
|
| |
Review remote access | #9 | Listen to current remote access code. | ||
|
| |||
code |
|
|
| |
|
|
|
| |
Change remote access | *9 | Change remote access code. | ||
code |
|
| ||
|
|
| ||
Turn system off | 0 | When the system announces, “Answering machine off ”, | ||
press 0 again to turn the system back on. | ||||
| ||||
|
|
|
| |
Turn system on | 0 | When the system is off, it answers after 10 rings and | ||
announces, “Please enter your remote access code.” Enter | ||||
|
| your remote access code. | ||
|
|
|
| |
•Your phone may not respond to remote access commands if tones produced by the telephone are too short. Hold the buttons down longer if this occurs.
Basic operation
www.vtechphones.com | 35 |
