www.vxitech.com
Sample Rate, High-Speed (0xAC, 0xD4) — Read & Write
D15 – D9 | Unused | These bits are reserved for future use. |
|
| Sample Interval – These bits set the high speed sample rate. |
D8 – D0 | SAMPRAT24 – 16 | Bit Weight = 8.333 ns/bit |
|
| Minimum Value = 6 |
|
| Maximum Value = 224 – 1 |
Sample Rate, High-Speed (0xAE, 0xD6) — Read & Write
D15 – D0
SAMPRAT15 – 0
Sample Interval – These bits set the high speed sample rate.
Bit Weight = 8.333 ns/bit
Minimum Value = 6
Maximum Value = 224 – 1
Sample Points (0x10, 0x38, 0x60, 0x88, 0xB0, 0xD8) — Read & Write
D15 – D4 | Unused | These bits are reserved for future use. | |
|
| Waveform Capture Size - In Linear mode, this sets the number of data | |
D3 – D0 | SIZE19 – 16 | points to be captured in a single sweep. In FIFO mode, this sets the | |
threshold for generating a service request interrupt or status bit. The | |||
|
| ||
|
| maximum size is 1 MSamples (2 Mbytes of data). |
Sample Points (0x12, 0x3A, 0x62, 0x8A, 0xB2, 0xDA) — Read & Write
D15 – D0
SIZE15 – 0
Waveform Capture Size - In Linear mode, this sets the number of data points to be captured in a single sweep. In FIFO mode, this sets the threshold for generating a service request interrupt or status bit. The maximum size is 1 MSamples (2 Mbytes of data).
| D15 – D4 | Unused | These bits are reserved for future use. |
|
|
| Size of |
|
|
| points to be stored before the trigger occurs. In FIFO mode, this register |
| D3 – D0 | PRE19 – 16 | is not used. |
|
| ||
|
|
| Minimum Value = 0 |
|
|
| Maximum Value = (Capture Size) – 1 |
|
|
| |
|
| ||
D15 – D0
PRE15 – 0
Size of
Minimum Value = 0
Maximum Value = (Capture Size) – 1
Trigger Delay (0x18, 0x40, 0x68, 0x90, 0xB8, 0xE0) — Read & Write
D15 – D0
DELAY31 – 16
Trigger Delay - The trigger delay value is used to set the number of samples between trigger occurrence and storing of data.
Minimum Value = 0
Maximum Value = 232 – 1
SVM2608 Programming | 37 |
