Unit Description, Front Panel, Bold Font | Western Telematic CMS-16

WTI CMS-16; Console Management Switch -- User's Guide

COURIER FONT

[Bold Font]

<>

[ ]

Indicates characters typed on the keyboard. For example, /E or /P 02.

Text set in bold face and enclosed in square brackets, indicates a specific key. For example, [Enter] or [Esc].

Indicates required keyboard entries: For Example: /P <n>.

Indicates optional keyboard entries. For Example: /W [n].

2. Unit Description

2.1. Front Panel

Figure 2.1: Instrument Front Panel

1.CLEAR: Restarts the CMS operating program without changing user-selected parameter settings or breaking port connections.

2.ON: Lights when AC Power is applied.

3.SET: Used to Initialize the CMS to defaults specified by the SetUp Switches. To initialize, press and hold both the SET and CLEAR buttons, release only the CLEAR button, wait for the Port LEDs to flash, and then release the SET button.

Note:

●During initialization, all port LEDs will flash ON three times.

●During initialization, all command-selected parameters will be cleared, and the CMS will revert to the default parameters specified by the Option Switches.

4.RDY: (Ready) Flashes to indicate unit is operational.

5.NET: Lights when a Network Connection is present.

6.ACTIVITY LEDs: Light to indicate data activity at the corresponding port. The CMS-16

file:///C/WEBPAGE/guides/cms/html/rev_b/Cmsguide.htm (7 of 59) [11/15/2000 10:52:02 AM]

Image 7

Western Telematic CMS-16 manual Unit Description, Front Panel, Bold Font

Contents

CMS-16 Battery Replacement Nameplate Power WarningRack Mount Installation Table of Contents WTI CMS-16 Console Management Switch -- Users Guide List of Figures Appendices Typographic Conventions Introduction Front Panel Unit DescriptionBold Font Getting Started Power Cable Receptacle Power SwitchBack Panel Communication Parameters Apply Power to the CMSSystem SetUp Ports Using Other Parameters for this Overview Optional Communicating with the CMS Unit Connecting your PC to the CMS Display Free Any Undefined Enter /H for Command Menu DC Powered Units Hardware InstallationConnecting Power to the CMS Unit AC Powered Units Default Baud Rate Sw1, Sw2, Sw3 Configure Option Switches Default Response Message Format Sw6 Default Handshake Sw4, Sw5Default Command Echo Sw7 Connecting Devices to the CMS Initialize Unit to Default SettingsApplication Example CMS Application Example Not to Scale Access to the CMS Command Mode Configuration $ telnet 192.1.1.1 Enter Password Functions Port Passwords Supervisor Password Defining the Site ID and Supervisor Password Configuration Conventions Port Configuration Port Modes 3. RS232 Port Configuration Menus CTS/RTS Stop Bits Default = AT&C1$D2S0=1 WTI CMS-16 Console Management Switch -- Users Guide Telnet Port Parameters Network Port Configuration Menu Network Parameters Menu Supervisor Mode Only Implementing IP Security Security menu Figure Copying Parameters to All Ports Copy Port Parameters Menu Save User Selected Parameters Status ScreensPort Status Screen /S Port Status Screen Supervisor Mode, Defaults Shown Port Diagnostics Screen /SD Port Name Status Baud COM HS Mode BUF CTS Port Parameters Screens /W Network Status Screen /SN WP xx Enter Operation Any-to-Any ModePort Connection and Disconnection Disconnecting Ports Enter Hunt Group Example Defining Hunt Groups Buffer Mode Passive Mode Xx Enter Reading Data from Buffer Mode PortsPort Buffers Modem Mode Saving and Restoring Configuration Parameters Restoring Saved Parameters Sending Parameters to a File Upgrading CMS Firmware Command Conventions Command Reference Guide Terse Verbose Command Response Command Availability Supervisor User Command Summary Enter Enter Command Mode Command Set Connect Enter+++Enter Resident Disconnect Sequence Third Party Disconnect CP Copy RS232 Port ParametersErase Buffer Set System Parameters Default and TestHelp Set Network Port Parameters Display Site IDSet RS232 Port Parameters SN Display Network Status SD Display Port DiagnosticsReset Network Port Display Port Status Save Parameters UF Upgrade FirmwareDisplay Port Parameters Who Appendix A. RS232 Port Interface Exit Command ModeFormat /X Enter Stop Bits 1 or Appendix B. SpecificationsAppendix C. Customer Service Power Trademarks Used in this Manual Trademark and Copyright Information