Wolf WKGD 126621 Introduction, Installation Operation Cleaning Lubrication, Specifications, Tools

FULL SIZE GAS CONVECTION OVEN - GENERAL

GENERAL

INTRODUCTION

Procedures in this manual will apply to all models unless specified. Pictures and illustrations can be of any model unless the picture or illustration needs to be model specific.

Models

		FEATURES				OPTIONS
MODEL	CAVITY	TEMPERATURE	DOORS	NORMAL	NORMAL	ROAST
					TIMER OR		BLOWER
	DEPTH	CONTROL	(50/50)	(ROAST)	HOLD	&	208/240/60/1
				TIMER		HOLD
					TIMER
WKG	26.5"	Mechanical (KX)	Independent 1, 2	1-Hour Dial	5-Hour Dial	Optional	Optional
WKGX	30.5"	Mechanical (KX)	Independent 1, 2	1-Hour Dial	5-Hour Dial	Optional	Optional
WKGD	26.5"	Solid State	Independent 1, 3	1-Hour Dial	5-Hour Dial	Optional	Optional
WKGDX	30.5"	Solid State	Independent 1, 3	1-Hour Dial	5-Hour Dial	Optional	Optional
WKGC	26.5"	Computer	Independent 1, 3	24-Hour	Built in	Built in	Optional
				Digital
WKGCX	30.5"	Computer	Independent 1, 3	24-Hour	Built in	Built in	Optional
				Digital

1.Simultaneous doors are optional (with or w/o window).

2.Stainless steel doors w/o window (standard).

3.Stainless steel doors with window (standard).

INSTALLATION

Refer to the Owner's Manual for detailed installation instructions on single or stacked ovens.

OPERATION

Refer to the Owner's Manual for specific operating instructions.

CLEANING

Refer to the Owner's Manual for specific cleaning instructions.

LUBRICATION

!Cavity blower motor has sealed bearings and requires no additional lubrication.

!Huskey’s TF1000 grease or equivalent high temperature Teflon grease.

SPECIFICATIONS

Electrical

Voltage	-	120/60/1
Amps	-	9.0 Amps

Input BTU Rating
Natural Gas	- 44,000	BTU input at 3.5 in. W.C.
Propane Gas	- 44,000	BTU input at 10.0 in. W.C.

Gas Line Pressures

Natural - Recommend (in. W.C.) 7.0, Min 5.0

Propane - Recommend (in. W.C.) 11.0, Min 11.0 Maximum 14.0 in. W.C. (Nat. or Prop.)

TOOLS

Standard

!Standard set of hand tools.

!VOM with A.C. current tester (Any quality VOM with a sensitivity of at least 20,000 ohms per volt can be used).

!Gear Puller to remove blower

Special

!Temperature tester (thermocouple type).

!Manometer

F32700 (February 2006) Page 4 of 64