FULL SIZE GAS CONVECTION OVENS - REMOVAL AND REPLACEMENT OF PARTS
COMPONENT PANEL
COMPONENTS
Removable Components Procedure
WARNING: DISCONNECT THE
ELECTRICAL POWER TO THE
MACHINE AND FOLLOW LOCKOUT /
TAGOUT PROCEDURES.
1.Remove the right side panel as outlined under
COVERS AND PANELS.
NOTE: If right side panel is not accessible, this component can be serviced by removing the control panel as outlined under COVERS AND PANELS.
2.Disconnect the wire leads to the component being replaced.
3.Remove the component.
4.Reverse the procedure to install the replacement component and check oven for proper operation.
Page 7 of 64 |
| F32700 (February 2006) |
|
